Drag Race Solutions ~ Custom Billet Race Car Parts, Collector Tethers & Just-N-Time Transbrake Buttons for Drag Racing!

Billet 12 Point Lug Nuts

12 Point Billet Aluminum Lug Nuts are manufactured from domestic 7075 material and come in polished aluminum and black anodized with a machined contrast cut.  12 point billet lug nuts are available in a wide range of sizes including metric and offer a great complement to your racing wheels.

Available in 5/8" no shank versions, short shank (.400 long x .687 O.D.), long shank (.710 long x .687 O.D.) and open end conical seat versions in both standard and metric thread to meet the requirements of your brand racing wheels.  Also a wide range of spacer washers are available to get the correct look you are wanting.

Our 5/8" Lug Nuts use a standard 15/16" 12 pt socket and all of our other sizes use a 3/4" 12 pt socket for plenty of clearance on most wheels.

Outside diameter of the base of the 5/8" lug nuts is 1.200. Shank Style base is 1.100 with a shank O.D. of .687.  Conical Seat have a .970 O.D. base.

MADE in U.S.A. / For Racing Use Only, Not intended for Street Use.

IMPORTANT

  • Make sure the threads on your studs are clean and not damaged in any way.
  • Anti-seize is included with all of our lug nuts.  You must use this to prevent gaulding.
  • Nuts should be started by hand to prevent cross-threading.
  • Stud threads should protrude a minimum of 1/8" out of the lug nut on when fully torqued.
  • Do NOT over torque your lug nuts as this can create an unsafe situation.
  • Aluminum lug nuts are for racing applications only and not recommended for OEM / Street use.

Recommended Torque Values - using anti-seize

  • 7/16" Lug Nuts - 85 ft lbs
  • 1/2" Lug Nuts - 85 ft lbs
  • 12 mm Lug Nuts - 85 ft lbs
  • 14 mm Lug Nuts - 85 ft lbs
  • 5/8" Lug Nuts - 100 ft lbs