Collector Tethers

Collector Tethers - Lock Nuts

Collector Tethers™ Lock Nuts are individually sold in packages of 4.  These are a very high quality non galling stainless steel lock nut.  Do not replace with standard lock nuts. Collector...

Collector Tethers - Weld On

Collector Tethers™ Weld On Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors. Weld On...

Collector Tethers - 1-1/2" Clamp set

Collector Tethers™ 1-1/2" Primary Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter

Collector Tethers - Lite 10"

Collector Tethers™ 10" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors. ...

Collector Tethers - Premium 10"

Collector Tethers™ 10" Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors.  Additional...

Nitrous Intake Restraints

Collector Tethers™ Manifold Tethers come individual.  By ordering (1) you will receive one intake restraint assembly.  Additional tethers and brackets may be purchased depending on your needs. NHRA...

Collector Tethers - 1-5/8" Clamp set

Collector Tethers™ 1-5/8" Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter Range:

Collector Tethers - Lite 15"

Collector Tethers™ 15" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors. ...

Collector Tethers - Premium 15"

Collector Tethers™ 15" Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors.  Additional...

Collector Tethers - Weld On Brackets

Collector Tethers™ Weld On Premium Tethers weld on brackets are .875 in length, 1" tall and .250 wide.   *** Tethers NOT included ***

Collector Tethers - 1-3/4" Clamp set

Collector Tethers™ 1-3/4" Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter Range:

Collector Tethers - Lite 20"

Collector Tethers™ 20" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header collectors. ...