Billet Aluminum 12pt Lug Nuts - M14x1.5 Long Shank Polished are manufactured from domestic 7075 material and come with a machine poished finish offering a great complement to your race car's racing wheels.
Our Short Shank M14x1.5 Billet 12pt Lugs nuts use as standard 3/4" 12 point socket. The O.D. on the head base washer is 1.100 with a Shank O.D. of .687 and .710 in length.
For safety, please make sure you have as much shank as possible penetrating your wheel without bottoming out on the hub or rotor face. Washers are NOT required on our billet lug nuts but we do offer spacer washers if needed.
MADE in U.S.A. / For Racing Use Only, Not intended for Street Use.
5 per package
- Make sure the threads on your studs are clean and not damaged in any way.
- Anti-seize is included with all of our lug nuts. You must use this to prevent gaulding.
- Nuts should be started by hand to prevent cross-threading.
- Stud threads should protrude a minimum of 1/8" out of the lug nut on when fully torqued.
- Do NOT over torque your lug nuts as this can create an unsafe situation.
- Aluminum lug nuts are for racing applications only and not recommended for OEM / Street use.
Recommended Torque Values - using anti-seize
- 7/16" Lug Nuts - 85 ft lbs
- 1/2" Lug Nuts - 85 ft lbs
- 12 mm Lug Nuts - 85 ft lbs
- 14 mm Lug Nuts - 85 ft lbs
- 5/8" Lug Nuts - 100 ft lbs
Other DetailsDue to their intended use, all Collector Tethers, Just-N-Time and Drag Race Solutions products are sold without any implied warranty of any kind. The buyer assumes all risk as to quality, performance and use of these products and agrees to hold Collector Tethers and their agents and employees harmless for any injury, loss or damages, including any and all incidental or consequential damages arising from the sale, installation or use.
1 Review Hide Reviews Show Reviews
Haven't installed them yet but they are made of nice quality and look to be very durable will be purchasing another set for my next project