Collector Tethers

Collector Tethers - Lock Nuts

Collector Tethers™ Lock Nuts are individually sold in packages of 4.  These are a very high quality non galling stainless steel lock nut.  Do not replace with standard lock nuts...

Collector Tethers - Weld On

Collector Tethers™ Weld On Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...

Collector Tethers - 1-1/2" Clamp set

Collector Tethers™ 1-1/2" Primary Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter Range:...

Collector Tethers - Lite 10"

Collector Tethers™ 10" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...

Collector Tethers - Premium 10"

Collector Tethers™ 10" Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...

Nitrous Intake Restraints

Collector Tethers™ Manifold Tethers come individual.  By ordering (1) you will receive one intake restraint assembly.  Additional tethers and brackets may be purchased depending...

Collector Tethers - 1-5/8" Clamp set

Collector Tethers™ 1-5/8" Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter Range: (1.625"...

Collector Tethers - Lite 15"

Collector Tethers™ 15" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...

Collector Tethers - Premium 15"

Collector Tethers™ 15" Premium Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...

Collector Tethers - Weld On Brackets

Collector Tethers™ Weld On Premium Tethers weld on brackets are .875 in length, 1" tall and .250 wide.   *** Tethers NOT included *** Collector Tethers™ Header Tethers are...

Collector Tethers - 1-3/4" Clamp set

Collector Tethers™ 1-3/4" Clamps are 100% Stainless Steel and are sold in pairs of 2. How to Measure: See our Instructions Page for detailed information. Clamp Diameter Range: (1.750"...

Collector Tethers - Lite 20"

Collector Tethers™ 20" Lite Header Tethers are an NHRA Accepted Header Tether Device and sold as assemblies.  By ordering (1) you will receive everything you need for two header...