Spring Mounting Plates

Quarter Turn DZUS Fastener Transfer Punch - 5/16" 1pk

Quarter Turn DZUS Fastener Transfer Punch - 5/16" 1pk - is the right tool for marking panels to be drilled for fasteners. Place the transfer punch in the weld plate or body panel, then position the panel over the top and lightly tap the panel to create...

Quarter Turn DZUS Fastener Transfer Punch - 5/16" 5pk

Quarter Turn DZUS Fastener Transfer Punch - 5/16" 5pk - are the right tools for marking panels to be drilled for fasteners. Place the transfer punch in the weld plate or body panel, then position the panel over the top and lightly tap the panel to create...

Quarter Turn DZUS Fastener Transfer Punch - 7/16" 1pk

Quarter Turn DZUS Fastener Transfer Punch - 7/16" 1pk - is the right tool for marking panels to be drilled for fasteners. Place the transfer punch in the weld plate or body panel, then position the panel over the top and lightly tap the panel to create...

Quarter Turn DZUS Fastener Transfer Punch - 7/16" 5pk

Quarter Turn DZUS Fastener Transfer Punch - 7/16" 5pk - are the right tools for marking panels to be drilled for fasteners. Place the transfer punch in the weld plate or body panel, then position the panel over the top and lightly tap the panel to create...

Qtr Turn DZUS Fastener Weld Plate - (3/4 inch - #4 - 10pk)

Quarter Turn DZUS Fastener Spring Plates are made from .060 mild steel and accept a #4, 3/4" spring and designed to weld on. (10 pack)  Made in U.S.A.

Qtr Turn DZUS Fastener Angled Plate - (1-3/8 inch - #6 - 10pk)

Quarter Turn DZUS Fastener Angled Spring Plates are made from .060 mild steel and accept a #6, 1-3/8" spring and designed to either rivet or weld on with their 90 degree design. (10 pack)  Made in U.S.A.

Qtr Turn DZUS Fastener Weld Plates - (1-3/8 inch - #6 - 10pk)

Quarter Turn DZUS Fastener Spring Plates are made from .060 mild steel and accept a #6, 1-3/8" spring and designed to weld on. (10 pack)  Made in U.S.A.

Qtr Turn DZUS Fastener Weld Plates - (1 inch - #5 - 10pk)

Quarter Turn DZUS Fastener Spring Plates are made from .060 mild steel and accept a #5, 1" spring and designed to weld or rivet on. (10 pack)  Made in U.S.A.

Qtr Turn DZUS Fastener Weld Plate - (1 inch - #5 - 10pk)

Quarter Turn DZUS Fastener Spring Plates are made from .060 mild steel and accept a #5, 1" spring and designed to weld on. (10 pack)  Made in U.S.A.