Replacement Parts

Bolt Kit - Dragster Dial In Board Bracket

This Stainless Steel Bolt Kit is for our Drag Race Solutions' Dragster Dial In Board Mount.  It includes 2) upright post bolts, 1) arch swivel bolt, 4) dial in board mounting bolts & washers. Made in U.S.A.

Bolt Kit - Clamp On Original Bracket

This Stainless Steel Bolt Kit is for our Drag Race Solutions' Original Clamp On Dial In Board Bracket.  It includes 2) clamp bolts, 2) upright post bolts, 1) arch swivel bolt, 4) dial in board mounting bolts & washers. Made in U.S.A.

Bolt Kit - Clamp On Lite Bracket

This Stainless Steel Bolt Kit is for our Drag Race Solutions' LITE Clamp On Dial In Board Bracket.  It includes 2) clamp bolts, 2) upright post bolts, 4) dial in board mounting bolts & washers. Made in U.S.A.

LED Tail Light - Replacement Bulb

LED Tail Light - Replacement Bulbs come in various colors. Whether you want to carry a spare, change colors or have had a failure, you can purchase a replacement element here.

Replacement Arm - Angled Raw

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to the angled scoop tray. Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Arm - Angled Black

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to the angled scoop tray. Fresh off the CNC and professionally powder coated with a satin black finish. Made in U.S.A.

Replacement Arm - Angled Chrome

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to the angled scoop tray. Fresh off the CNC and professionally chrome plated. Made in U.S.A.

Replacement Arm - Flat Raw

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to a flat scoop tray. Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Arm - Flat Black

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to a flat scoop tray. Fresh off the CNC and professionally powder coated with a satin black finish. Made in U.S.A.

Replacement Arm - Flat Chrome

This dial board bracket arm is a direct replacement part. It is the lower arm that bolts to a flat scoop tray. Fresh off the CNC and professionally chrome plated. Made in U.S.A.

Replacement Arch - Raw

This dial board bracket arch is a direct replacement part. It is the arch that bolts to the arm only. Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Arch - Black

This dial board bracket arch is a direct replacement part. It is the arch that bolts to the arm only. Fresh off the CNC in Raw Billet Aluminum and professionally powder coated satin black. Made in U.S.A.

Replacement Arch - Chrome

This dial board bracket arch is a direct replacement part. It is the arch that bolts to the arm only. Fresh off the CNC in Raw Billet Aluminum and professionally chrome plated. Made in U.S.A.

Replacement Arm - Original Clamp On Raw

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps to the arch. Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Arm - Original Clamp On Black

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps to the arch. Fresh off the CNC in Raw Billet Aluminum finish and professionally powder coated satin black. Made in U.S.A.

Replacement Arm - Original Clamp On Chrome

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps to the arch. Fresh off the CNC in Raw Billet Aluminum finish and professionally chrome plated. Made in U.S.A.

Replacement Arm - Lite Clamp On Raw

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps and hold the uprights. Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Arm - Lite Clamp On Black

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps and hold the uprights. Fresh off the CNC in Raw Billet Aluminum and professionally powder coated satin black. Made in U.S.A.

Replacement Arm - Lite Clamp On Chrome

This dial board bracket arm is a direct replacement part. It is the lower arm that goes from the roll bar clamps and hold the uprights. Fresh off the CNC in Raw Billet Aluminum and professionally chrome plated. Made in U.S.A.

Replacement Clamps - Raw

This is a pair of dial board bracket clamps. The clamps hold the dial in board bracket arm itself (bolts included). Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Clamps - Black

This is a pair of dial board bracket clamps. The clamps hold the dial in board bracket arm itself (bolts included). Fresh off the CNC in Raw Billet Aluminum and professionally powder coated satin black. Made in U.S.A.

Replacement Clamps - Chrome

This is a pair of dial board bracket clamps. The clamps hold the dial in board bracket arm itself (bolts included). Fresh off the CNC in Raw Billet Aluminum and professionally chrome plated. Made in U.S.A.

Replacement Uprights - Raw

This is a pair of dial in board bracket uprights. The uprights hold the dial in board itself (bolts NOT included). Fresh off the CNC in Raw Billet Aluminum finish. Made in U.S.A.

Replacement Uprights - Black

This is a pair of dial in board bracket uprights. The uprights hold the dial in board itself (bolts NOT included). Fresh off the CNC in Raw Billet Aluminum and professionally powder coated satin black. Made in U.S.A.

Replacement Uprights - Chrome

This is a pair of dial in board bracket uprights. The uprights hold the dial in board itself (bolts NOT included). Fresh off the CNC in Raw Billet Aluminum and professionally chrome plated. Made in U.S.A.

Flip-A-Dial Dial In Board - 3 Digit

Flip-A-Dial Dial In Board is a 3 digit white number on black.  It has a standard mounting pattern for most dial in board brackets including all of our DRS billet dial in board brackets.  1 board included per package. Made in U.S.A.