Order Online - 24hrs a day!
We ship USPS & Fedex
Drag Race Solutions ~ Custom Billet Race Car Parts, Collector Tethers & Just-N-Time Transbrake Buttons for Drag Racing!
Custom Billet Race Car Parts for Drag Racing and Dragsters. Powerglide Shifters, Dzus Fasteners, Transbrake Buttons, Billet Water Necks, Electric Shifter Solenoids, Dial In Board Brackets and 12pt Billet Lug Nuts.
Racers ourselves, we spend a tremendous amount of time researching, developing and testing to offer you what we feel are "The Coolest Parts Available" for your race cars.
5/8"
12 Point Billet Aluminum Lug Nuts (5/8-18 thread) are manufactured from domestic 7075 material and come in polished aluminum and black anodized with a machined contrast cut offering a great complement to your racing wheels.
Outside diameter of the base of the 5/8" lug nuts is 1.200. The lug nut thickness is 1" and we offer a wide range of spacer washers to get the correct look you are wanting. Washers are NOT required. A standard 15/16" 12 pt socket is required.
MADE in U.S.A. / For Racing Use Only, Not intended for Street Use.
5 per package
IMPORTANT
- Make sure the threads on your studs are clean and not damaged in any way.
- Anti-seize is included with all of our lug nuts. You must use this to prevent gaulding.
- Nuts should be started by hand to prevent cross-threading.
- Stud threads should protrude a minimum of 1/8" out of the lug nut on when fully torqued.
- Do NOT over torque your lug nuts as this can create an unsafe situation.
- Aluminum lug nuts are for racing applications only and not recommended for OEM / Street use.
Recommended Torque Values - using anti-seize
- 7/16" Lug Nuts - 85 ft lbs
- 1/2" Lug Nuts - 85 ft lbs
- 12 mm Lug Nuts - 85 ft lbs
- 14 mm Lug Nuts - 85 ft lbs
- 5/8" Lug Nuts - 100 ft lbs